导航菜单
首页 >  » 正文

5208是什么意思_5208英文翻译

5208

5208 双语例句

1. At present the processing of 6000-6012, 6200-6210, 6300-6308, 16000-16012, 61803-61809, 6903-6910, R8-R18, W6201-W6208, 63002-63009, 62200-62208, 62301-62308, UC6202-6208, and other products and other non-standard products; 2, a separate double row angular contact (open, ZZ, 2RS) bearings. 5002-5008, 5200-5208, 5301-5307, 3201-3208, 3301-3308, 4202-4208, 7202 B-7210B, 3805, 633873, 309796, 38 BW-19, 6559469, 38 BG05S6DST2, 35BG05S10DST2, 40BGS11DS, 5005NSL, such as clutch and Wheel bearings and RV series, and the ball joint campaign.
目前加工范围6000—6012、6200—6210、6300—6308、16000—16012、61803—61809、6903—6910、R8—R18、W6201—W6208、63002—63009、62200—62208、62301—62308、UC6202-6208等产品以及其他非标产品;2、单列双列角接触(开式、ZZ、2RS)轴承。5002—5008、5200—5208、5301—5307、3201—3208、3301—3308、4202—4208、7202B—7210B、3805、633873、309796、38BW-19、6559469、38BG05S6DST2、35BG05S10DST2、40BGS11DS、5005NSL等离合器和轮毂轴承以及RV系列和关节球系列。

2. GB/T1047 pipe components DN of the definition and use (GB/T1047-2005, ISO6708:1995, IDT) GB/T1048 pipe components PN of the definition and use (GB/T1048-2005, ISO/CD7268:1983, IDT) GB/T1184 shape and position tolerances without tolerances values (GB/T1184-1996, eqvISO2768-2:1989) GB/T5796.1~579*** trapezoidal thread (GB/T5796.1~579***-1986, eqvISO2901~2904; 1977) GB/T12220 General Valve logo (GB/T12220-1989, idtISO5209:1977) GB/T12221 metal valve structure length (GB/T12221-2005, ISO5752:1982, MOD) GB/T12222 multi-turn valve actuator attachment (GB/T12222-2005, ISO5210:1991, MOD) GB/T12225 common valve copper alloy castings GB/T12226 General Valve gray iron castings GB/T12227 General Valve ductile iron castings GB/T13927 common valve pressure test (GB/T13927-1992, neqISO5208:1982) GB/T17219 in drinking water equipment and protective materials, safety evaluation GB/T17241.6 whole cast iron pipe flanges (GB/T17241.6-1998, neqISO7005-2:1988) GB/T17241.7 cast iron pipe flanges (GB/T17241.7-1998, neqISO7005-2:1988) JB/T7748 valve cleanliness and determination JB/T7928 General requirements valve supplier Three parameters and structure type 3.1 Nominal pressure Forged Steel Pressure Seal Gate Valves valve according to GB/T1048 requirements.
GB/T1047管道元件DN的定义和选用(GB/T1047—2005,ISO6708:1995,IDT) GB/T1048管道元件PN的定义和选用(GB/T1048—2005,ISO/CD7268:1983,IDT) GB/T1184形状和位置公差未注公差值(GB/T1184—1996,eqvISO2768-2:1989) GB/T5796.1~579***梯形螺纹(GB/T5796.1~579***—1986,eqvISO2901~2904;1977) GB/T12220通用阀门标志(GB/T12220—1989,idtISO5209:1977) GB/T12221金属阀门结构长度(GB/T12221—2005,ISO5752:1982,MOD) GB/T12222多回转阀门驱动装置的连接(GB/T12222—2005,ISO5210:1991,MOD) GB/T12225通用阀门铜合金铸件技术条件 GB/T12226通用阀门灰铸铁件技术条件 GB/T12227通用阀门球墨铸铁件技术条件 GB/T13927通用阀门压力试验(GB/T13927—1992,neqISO5208:1982) GB/T17219生活饮用水输配水设备及防护材料的安全性评价标准 GB/T17241.6整体铸铁管法兰(GB/T17241.6—1998,neqISO7005-2:1988) GB/T17241.7铸铁管法兰技术条件(GB/T17241.7—1998,neqISO7005-2:1988) JB/T7748阀门清洁度和测定方法 JB/T7928通用阀门供货要求 3参数与结构型式 3.1阀门公称压力按GB/T1048的规定。

3. The extraction properties of uranyl nitrate from simulated solutions and its separation from impurities with a new type alkylphosphonate ester extractant were studied in the paper. It was compared with the widely used TBP.
本文研究了一种新型烷基膦酸酯萃取剂(5208)从人工配制的模拟溶液中萃取硝酸铀酰及分离杂质的性能,并与现在广泛使用的TBP萃取剂作了对比。

4. 5208的近义词

4. In this paper, a micromechanical investigation for laminates composites with internally-dropped plies (T300/5208) has been performed by means of micro-moir é interferometry under compression.
本文运用显微云纹干涉法在细观尺度研究了压缩状态下叠层复合材料(T300/5208)层缩区的力学行为;

5. 5208在线翻译

5. In this paper, a micromechanical investigation for laminates composites with internally-dropped plies (T300 / 5208) has been performed by means of micro-moir é interferometry under compression.
本文运用显微云纹干涉法在细观尺度研究了压缩状态下叠层复合材料(T300/5208)层缩区的力学行为;